Bitumen Coated 50-50KN/M Fiberglass Geogrid Parking Lot Asphalt Pavement Reinforcement GlassGrid

Coated Asphalt Reinforcement Fibreglass Geogrid Geocomposites are asphalt reinforcement composites which are fiberglass geogrid with light weight PET Spunbond Nonwoven Fabric. They are stitched and coated with bitumen to strengthen the bond with the asphalt layer. The asphalt layer to increase the tensile strength to prevent the road surface cracks caused by the reflection of the base crack. The chemical stability is good, the heat stability is good, anti-fatigue dehiscence, anti-low temperature shrinkage crack, delay reduction reflection crack.

Fiberglass Geogrid Function:

High temperature resistance (mostly used in the construction of asphalt pavement)

• Effective reinforcement and anti-cracking, effectively prolonging the life of the road
• Asphalt pavement, cement concrete pavement subgrade reinforcement
• It has high tensile strength and low elongation in both directions of warp and weft, and has excellent properties
• High temperature resistance, low cold resistance, aging resistance, and corrosion resistance.
• Slow down cracking

 Yixing Shenzhou 50-50KN/M Fiberglass Geogrid Key Technical Advantages:

✔ Balanced Biaxial Strength (50×50 kN/m)
✔ Ultra-Low 3% Elongation Under Load
✔ Temperature Resistant (-50°C to +250°C)
✔ Reflective Crack Reduction Up to 70%
✔ Easy to Install – Immediate Asphalt Overlay Possible

Fiberglass Geogrid Specification:

customized specification, type, aperture is available.

Alkali resistant fiberglass geogrid supplier

Mesh size: 25mm x 25mm
Roll width: 5.9m
Roll length: 100m or 50m
Package: In roll form

Applications of Fiberglass Geogrid

1. Road & Highway Reinforcement

• Reduces asphalt cracking and rutting.

• Extends pavement lifespan.

2. Retaining Walls & Slopes

• Provides structural stability for reinforced soil structures.

3. Airport Runways & Parking Lots

• Enhances load-bearing capacity for heavy traffic areas.

4. Landfill & Erosion Control

• Strengthens soil layers and prevents erosion.

About us

Our Factory was established in 2004, Designed and manufactured in-house at ISO 9001 certified manufacturing

facilities our line to meets demanding QA/QC requirements and are continuously tested to rigorous ASTM standards

both in-house and by leading independent geosynthetics.

Product availability:

Plastic Geogrid ( Biaxial / Uniaxial / Triax / Hexagon )

Warp knitted Fiberglass geogrid coated with bitumen

Warp knitted woven coated polyester geogrid

HDPE Geocell

Non Woven Geotextile with PET and PP material. With staple fibre and filament process

HDPE / LDPE / LLDPE Geomembrane

Geocomposited Geogrid / Geocomposited membrane

GCL

Custimized product

We have a strict Quality Control System, which is a set of systematic and standardized management processes

and methods established to ensure that products or services meet established standards and customer requirements.

It runs through all stages of product design, production, inspection and delivery, aiming to reduce defects, improve quality,

lower costs, and enhance customer satisfaction.