|
| 브랜드 이름: | SZ |
| 모델 번호: | 폴리에스테르 지오그리드 |
| 모크: | 10.000 m2 |
| 가격: | $0.3-$2.0/SQM |
| 지불 조건: | T/T,L/C |
| 공급 능력: | 하루 30.000 평방 미터 |
Warp Knitted Grid Mesh Size 50.8mm Polyester Biaxial Geogrid Base Reinforcement Of Unpaved And Paved Roads
What is a Polyester Biaxial Geogrid?
It is a high-strength synthetic grid made from high-tenacity polyester (PET) yarns,
woven and coated to create a grid structure with large, open apertures.
The key term "biaxial" means that it is engineered to have significant tensile strength and stiffness
in two perpendicular directions—typically along the machine direction (roll length) and the cross-machine direction (roll width).
This equalizes stress distribution in a plane, making it ideal for stabilizing weak subgrades and spreading loads over a wider area.
Comparison with Other Geogrid Types :
vs. Uniaxial Polypropylene (PP) Geogrids:
Polyester is stronger and has much better creep resistance than PP,
making it the preferred choice for permanent, critical structures.
PP is more cost-effective for smaller, temporary, or less critical applications.
vs. Biaxial Geogrids:
Biaxial geogrids have strength in two perpendicular directions and are used for
base reinforcement of roads, parking lots, and platforms where loads are applied
from multiple directions. Uniaxial is specialized for one-directional reinforcement in walls and slopes.
Yixing Shenzhou Polyester Geogrids:
1.Uniaxial Polyester Geogrids:
Stronger in one direction, used for reinforcement in specific directions, such as retaining walls.
Popular Types : 100-30 KN/M ; 200-30 KN/M ; 200-50 KN/M ; 250-50 KN/M ; 200-100 KN/M
2. Biaxial Polyester Geogrids:
Strong in both directions, suitable for applications requiring reinforcement in all directions, like embankments and slopes.
Hot Sell Models : 80-80 KN/M ; 120-120KN/M ; 200-200KN/M； 500-500KN/M
Polyester Geogrids Coating PVC Or Coated SBR
Polyester Biaxial Geogrid Technical Specification (ASTM/ISO Standards)
| Property | 100 kN/m | 200 kN/m | 300 kN/m | Test Method |
|---|---|---|---|---|
| Tensile Strength (MD) | ≥100 kN/m | ≥200 kN/m | ≥300 kN/m | ASTM D6637 / ISO 10319 |
| Elongation at Break | ≤13% | ≤13% | ≤13% | ASTM D6637 |
| Creep Limit (50 yrs) | ≤2% | ≤2% | ≤3% | ISO 13431 |
| Aperture Size |
25.4*25.4mm / 50.8*50.8mm |
25.4*25.4mm / 50.8*50.8mm |
25.4*25.4mm / 50.8*50.8mm |
- |
Packing and Shipping
Selling packing: Customers' company Logo mark can be designed and added.
Outer packing: Packed in double layer woven bags to ensure smooth arrival and avoid rough handle.
Delivery Detail: Winthin 10 days after received your deposit
Delivery Detail: 100,000 square meters can be finished within 3 days
Delivery Time: 3-20 days after confirming order, detail delivery date should be decided according to
production season and order quantity.
Polyester Biaxial Geogrid are used in applications :
Reinforced Soil Walls (MSE Walls):
This is the most common application. The geogrid layers are placed horizontally between
soil layers to create a stable, reinforced mass that can retain soil at a steep angle.
Reinforced Steep Slopes: Similar to walls, but for slopes at angles steeper than what the
soil could naturally maintain. The geogrid provides the necessary tensile strength to prevent slope failure.
Embankment Stabilization over Soft Soils: When building an embankment on soft, weak ground,
layers of geogrid are used to prevent circular slip failures and distribute the load, ensuring global stability.
Foundation Reinforcement:
In some cases, they are used to improve the bearing capacity of foundations.
.
Yixing Shenzhou Geosynthetics Polyester Geogrid Design and Construction Workflow:
Site & Soil Analysis: Geotechnical engineers analyze the soil conditions, loads, and required wall height.
Design: Engineers specify the geogrid type (polyester), its strength, length, and vertical spacing between layers.
The length is crucial for creating a stable reinforced zone.
Construction:
A leveling pad is prepared.
The first layer of wall facing units is placed.
A layer of select backfill is placed and compacted.
The polyester geogrid is rolled out over the compacted soil and connected to the wall face.
The process repeats: backfill, compact, place geogrid, until the top is reached.
More expertise and solutions for PET Grid Polyester Geogrids,
please contact Yixing Shenzhou Amelie
Email : amelie@geogrid-cn.com
Mob/Whatsapp : 0086 13815119816
Welcome To Get Free Sample!!!
