logo

Einzelheiten zu den Produkten

Created with Pixso. Zu Hause Created with Pixso. Produits Created with Pixso.
Fiberglas Geogrid
Created with Pixso.

Fiberglass Reinforcement Geogrid Coated With Elastomeric Polymer For Basal Construction

Fiberglass Reinforcement Geogrid Coated With Elastomeric Polymer For Basal Construction

Markenbezeichnung: SZ
Modellnummer: Fg
MOQ: 10,000 Quadratmeter
Preis: $0.3-$2.0/SQM
Zahlungsbedingungen: L/c, t/t
Versorgungsfähigkeit: 100,000 Quadratmeter pro Woche
Einzelheiten
Herkunftsort:
China
Zertifizierung:
ISO,CE
Produktname:
Glasfaserverstärkung Geogrid
Anwendung:
Basalkonstruktion
Funktion:
Verstärkung des Glasgitters
Material:
Glasfasergarn
Beschichtung:
Bitumen- und Asphaltnetz
Zugfestigkeit:
30 kN/m bis 300 kN/m
Dehnungsrate:
<= 4%
Rollenmaß:
Breite 1 - 6 m, Länge 50 - 200 m
Netzgröße:
25.4*25,4mm 12.7*12.7 50.8*50.8
Standard:
ASTM ISO
Verpackung Informationen:
Durch Rollen, Papierrohr + schwarze PE-Schrumpfmembran + gewebte Tasche (wasserdicht und UV-beständi
Versorgungsmaterial-Fähigkeit:
100,000 Quadratmeter pro Woche
Hervorheben:

fiberglass geogrid for basal construction

,

elastomeric polymer coated geogrid

,

reinforcement geogrid with polymer coating

Beschreibung des Produkts

Fiberglass Reinforcement Geogrid Coated With Elastomeric Polymer For Basal Construction

 

Fiberglass geogrid is knitted by glass fiber filaments and coated with bitumen to provide a good bond with the asphalt layers, can strengthen the asphalt layer, extend the service life ot pavement layers and decrease the occurrence rate of reflective cracking under cyclic traffic load.

 

Product name
Fiberglass Geogrid
Tensile strength
30-300kN/m
Width
1-6m
Length
50m-100m or Customizable
Color
Black
Raw material
Glass fiber
Storage condition
Sealed in dry, cold, waterproof & ventilated conditions
Package
Woven bag as request or Customizable
Shelf life
5 years in nomal temp
Weight
≥20kg according to size
Certification
ISO 9001/ 14001/ 45001, CE

 

Fiberglass Reinforcement Geogrid Coated With Elastomeric Polymer For Basal Construction 0Fiberglass Reinforcement Geogrid Coated With Elastomeric Polymer For Basal Construction 1

Fiberglass Reinforcement Geogrid Application

● It reinforce old asphalt concrete road surface and asphalt layer, and prevents damage
● It is used for rebuilding cement concrete road surface into composite road surface and restraining reflection caused by block contraction
● It is used in road expansion and improvment project and crack caused by old and new combination position and uneven sedimentation
● Coated Fiberglass Geogrid is used in soft soil base reinforcement treatment ,is favorable for soft soil water separation and concretion,restrains sedimentation effectivly,distributes stress uniformly and improve overall strength of road base
● High Strength Fiberglass Geogrid is sued for preventing contraction crack caused by new road semi-rigid base layer,and reinforces and prevents road surface crack caused by foundation crack reflection.

Fiberglass Reinforcement Geogrid Coated With Elastomeric Polymer For Basal Construction 2

Maintenance requirements and precautions

 

1. Maintenance during the construction phase

  • Base treatment: Before laying, the base needs to be thoroughly cleaned to ensure that there are no sharp objects, oil stains and loose particles to prevent damage to the grille or bonding failure.
  • Laying specifications:
  • When using the self-adhesive method, it is necessary to ensure that the adhesive surface fits tightly, and the overlap width is 75-150mm vertically and 25-50mm horizontally to avoid wrinkles or twists.
  • When using the anchoring method, it is necessary to avoid nailing the nails directly into the glass fiber layer to prevent fiber breakage.
  • Timely covering: After laying, the asphalt mixture or filler should be covered as soon as possible to reduce the aging of the adhesive layer caused by direct exposure to ultraviolet rays.

2. Maintenance during the use phase

  • Regular inspection: Focus on monitoring whether there is debonding or local damage in the joints and edge areas, and repair them in time to prevent cracks from expanding.
  • Chemical pollution protection: If used in chemical areas, it is necessary to regularly remove surface oil or corrosive substances to avoid long-term infiltration affecting the performance of the coating.

Key measures to extend durability

 

1. Model selection optimization

  • Select the corresponding tensile strength (such as 20-120KN/m) and mesh size (preferably 0.5-1 times the maximum particle size of asphalt aggregate) according to project requirements to ensure the interlocking effect.

2. Environmental adaptation design

  • Anti-UV coating models are selected in high-ultraviolet areas; drainage design is strengthened in rainy and humid areas to reduce water damage.

3. Composite technology application

  • Combine geotextile or steel-plastic grid to form a composite structure to improve impact resistance and fatigue resistance, suitable for heavy-load traffic sections.

Fiberglass Reinforcement Geogrid Coated With Elastomeric Polymer For Basal Construction 3

 

YIXING SHENZHOU Geosynthetics make infrastructure more sustainable. They extend the service life of roads, reduce the use of aggregates, conserve and protect water, minimize land disturbance and control soil erosion.

Sustainability is at the heart of what we do.

 

 

For more sustainable roads, use our geosynthetics

Contact us now and learn more about our products

Cathy

WA/ Wechat : 0086 139 0153 8890

cathy@geogrid-cn.com

Fiberglass Reinforcement Geogrid Coated With Elastomeric Polymer For Basal Construction 4Fiberglass Reinforcement Geogrid Coated With Elastomeric Polymer For Basal Construction 5